Guild Ball: First Impressions

While I was away at Adepticon, I had the opportunity to meet two nice gents, Mat and Rich, who have developed a game some of […]

While I was away at Adepticon, I had the opportunity to meet two nice gents, Mat and Rich, who have developed a game some of you may have heard of called Guild Ball. I saw it go through it’s Kickstarter, without causing a massive stir, generating a little under 1000 backers, and decided I would hold off to see if it picks up momentum.

This model alone sold me on Guildball

This model alone sold me on Guildball

Well, after 2 years, the guys at Steamforged Games have successfully had a 128-player tournament in the UK, and just had a 64-player tournament at Adepticon. That may not sound huge compared to the 350+ players for the 40k Championships at the Las Vegas Open, but for a 2 year old company, that’s actually quite impressive. 64 players is about double the turn out for the Infinity ITS GT at Adepticon, and as far as I could tell, the biggest event outside of 40k and X-wing! After meeting the game designers and having a good long chat with them, I noticed a trend around the gaming halls, everyone had a Guild Ball team in their bag, and many were excited to talk about the game.

What’s the deal with Guild Ball?

JerrySeinfeld9

Putting our thinking caps on, Pete, Obi and I had a few beers and decided to have a good brain storming session to try and figure out the sudden success of the game. Obi and I had done a demo game, and it basically played a lot like Warmachine, though with fewer models and the objective of kicking soccer-like goals, instead of assassinating enemy Warcasters. That’s not to say there isn’t plenty of violence, you actually score points both by kicking these goals and taking out enemy players. In our beer-tainted haze, we kind of came up with a few different reasons why we thought the game was taking off so quickly.

  1. $0 Cost of Entry – All the rules are free and they offer paper cut outs of their miniatures on the website, you can literally begin playing for only the cost of the paper.
  2. Small Faction Sizes – Once you start buying the models, there aren’t a ton you have to purchase, a full game is played with a captain, 4 players, and a mascot, 6 total models, that’s it, that’s not a small team, not a large team, but exactly what it takes to play, if you own 7 models, you will never be able to play with them all.
  3. Short Games – Games comes in 3 sizes, Intro games of just 3 models per side, played to 8 points (a goal is 4 points, taking out an enemy player is 2), with a 30-minute time limit, the larger, Quick Game and Typical Game are both played with full teams, the only difference is the time limit (60 vs 90-120 minutes) and the points to win (8 vs 12). If you’re playing a tournament, then 2 hours per game is MORE than enough for most typical games, plus it seems designed to work with a time limit.
  4. Familiar Rules – There’s no getting around the fact that Guild Ball borrows a ton of rules from Warmachine, and though it’s not my favorite game, I do appreciate the familiarity. If you’ve played any WMH in the past, you’ll quickly pick up the rules to the game, and if you haven’t, the Guild Ball rules are quite streamlined and easy to pick up anyhow.
  5. Style – There are many sportsball games in the world, so it’s easy to be lost amongst the noise. To survive in the heavily competitive world of miniature wargames, you really need your models to stand out. Guild Ball models are all well designed and sculpted, each team with a bit of distinctive flair, and nothing feeling terribly generic or uninteresting. Their art is all very characterful and distinctly unique, and they’ve spared no expense getting some of the best miniature painters in the world to bring their studio armies teams to life.

The Miniatures

After mulling it over a bit, I finally decided to bite, my curiosity got the best of me and before long I was walking away from the Steamforged Games booth with arms full of Brewers. I had purchased the entire team (actually I missed Spigot, who I ordered yesterday), plus a handful of The Union (the mercenaries of the game). The first models out of the packaging when I got home, I quickly got to assembling my new collection of pewter dolls.

Brewers Starter Contents

Brewers Starter Contents

The models themselves are pretty finely detailed, about the casting quality of the GW pewter miniatures, a bit of flash, but nothing awful, though it did make me remember how spoiled I am with Corvus Belli’s pewter casting process. That said, the models just needed some minor work to make perfect and they were ready to go! I chose to pin my pieces, out of habit, and found that the pewter was easier to drill into, which I quite liked. Not long after getting started, I got carried away and assembled the whole bunch.

guild-ball-brewers

Let’s Play Ball!

It didn’t take me long to find a group of about 30 people in the Portland Oregon area who enjoy the game, and a few of them even play at my local game store. With miniatures in hand, I went down to my local shop to play my first game of Guild Ball. He also had brewers, and we played an Introductory Game, where we both used the contents of the starter pack. I was a bit skeptical at first, thinking that both of us bringing the exact same 3 models would lead to a boring game, but I was quickly proven wrong.

Kickoff!

Kickoff!

After a quick recap of the rules, we were off. I received the ball, and quickly noticed that I just might be able to score a turn 1 goal with Friday, the Brewers striker. Getting hot in my heels, I moved up the board aggressively, only to have Friday knocked on her ass by a boat oar swung by my opponent’s Hooper. He scooped up the ball with his own Friday and quickly scored a goal against me. This isn’t going to be as easy as I thought… After his goal against me, I threw the ball back into play, right next to my own striker, who grabbed the ball and returned the favor, scoring a goal in return. The game was now tied, one more goal and either of us can win the game.

He threw the ball back in to an unoccupied area of the table. That turned out to be his undoing though, he rolled for scatter and it bounced right next to my weakest striker, Hooper. Hooper quickly nabbed the ball and ran within scoring range, next to my opponent’s downed Tapper. While I was within range, I didn’t have the momentum needed (one of the two resources in the game). Fortunately though, I had the Influence (the WMH Focus-like resource) to buy an attack on Tapper, giving him a bit of the boot while he was on the ground. I now had the momentum to kick the ball with my mere 2 Kicking dice, one came up a 5 the other a 1, the ball sailed into the goal and the crowd went wild! I had won my first Guild Ball game.

sportsball

After my first game, I can now really see the draw, it’s very fast paced and exciting, and while it has combo’s like Warmachine, they’re easier to figure out and execute, and not nearly as important to win the game. Like Infinity, I think you could reasonably play fine with whatever models you think look best, it’s just a matter of figuring out their strengths and playing to them. I’m pretty excited to get some paint on these models, they just look lovely when done well, and I could even see playing in a tournament or two. Overall, I give the game an enthusiastic thumbs up, otherwise you probably wouldn’t see me writing about it!

How could I possibly resist this?!

How could I possibly resist this?!

Next up on the block is event coverage for the Infinity tournaments at Adepticon which I participated in, stay tuned!

About Adam B

I've been at this for 20 years now! You can find me playing Infinity (USAriadna and Combined) mostly, and sometimes Heavy Gear, Necromunda, or Test of Honour. Also, I love miniature board games like: Blood Bowl, Warhammer Quest, and Space Hulk, plus Aristeia and Warhammer Underworlds coming soon!